Bloggo back to the blog
Part 4: Automated Regression Testing: Impact Analysis and Regression Testing Compared and Combined by Paul Gerrard, Gerrard, Consulting, UK-->
Please note – This is part 4 of the article – If you missed parts 1, 2 or 3 , please scroll down to read them
In Parts I and II of this article series, we introduced the nature of regression, impact analysis and regression prevention. In Part III we looked at Regression Testing and how we select regression tests. This article focuses on the automation of regression testing.
Much has been written on the challenges and pitfalls of test automation. The lessons learned by practitioners in the mid-90s are substantially the same as those facing practitioners today. I have to say that it’s a cause of some frustration that many companies still haven’t learnt them. In this article, there isn’t space to repeat those lessons. The referred papers, books and blogs at the end of this article focus on implementing automation, primarily from a user interface point of view, and sometimes as an end in itself. To complement these texts, to bring them up to date and focus them on our anti-regression objective, the remainder of this article will set out some wider considerations.
Regression test objectives and (or versus?) automation
The three main regression test objectives are set out below together with some suggestions for test automation. Although the objectives are distinct, the differences between regression testing and automation for the three objectives are somewhat blurred.
|Anti-Regression Objective||Source of Tests||Automation Considerations|
|Functional system tests||Consider the criteria in references 6, 7, 8|
|Integration tests||Most likely to be automated using drivers to component and sub-system interfaces|
|Test-first, test-driven environments generate automated tests naturally||Consider reference 9 and the discussion of testing in TDD and Agile in general.|
|Acceptance Tests, business process flows, ‘end to end’ tests.|
Consider the criteria in references 6, 7, 8 but expect mostly manual testing for demonstration purposes.
See reference 10 for an introduction to Acceptance Driven Development.
Regression objectives reframed: detecting regression v providing confidence
Of the three regression test objectives above, objectives 1 and 2 are similar. What differentiates them is who (and where) they come from. Objective 1 comes from a system supplier perspective and tests are most likely to be sourced from system or integration tests that were previously run (either manually or automated). Objective 2 comes from a developer or technical perspective where the aim is to perform some refactoring in a safe environment. By and large, ‘safe’ refactoring is most viable in a Test-Driven environment where all unit tests are automated, probably in a Continuous Integration regime. (Although refactoring at any level benefits from automated regression testing).
If objectives 1 and 2 require tests to demonstrate ‘functional equivalence’, regression test coverage can be based on the need to exercise the underlying code and cover the system functionality. Potentially, tests based on equivalence partitioning ought to cover the branches in code (but not housekeeping or error-handling functionality – but see below). Tests covering edge conditions or boundary values should verify the ‘precision’ of those decisions. So a reasonable guideline could be – use automation to cover functional paths through the system and data-drive those tests to expand the coverage of boundary conditions. The automation does not necessarily have to execute tests that would be recognisable to the user, if the objective is to demonstrate functional equivalence.
Objective 3 – to provide confidence to stakeholders is slightly different. In this case, the purpose of a regression test is to demonstrate to end users that they can execute business transactions and use the system to support their business. In this respect, it may be that these tests could be automated and some automated tests that fall under the category 1 and 2 above will be helpful. But experience of testing GUI applications in particular suggests that end users sometimes only trust their own eyes and need to have a hands-on experience to give them the confidence that is required. Potentially, a set of automated tests might be used to drive a number of ‘end to end’ transactions, and reconciliation or control reports could be generated to be inspected by end users. There is a large spectrum of possibilities of course. In summary, automated tests could help, but in some environments, the need for manual tests as a ‘confidence builder’ cannot be avoided.
At what level(s) should we automate regression tests?
In Part III of this article series, we identified three levels at which regression testing might be implemented – at the component, system and business (or integrated system) levels. These levels should be considered as complementary and the choice is where to place emphasis, rather than which to include or exclude. The choice of automation at these levels is not really the point. Rather, a level of regression testing may be chosen primarily to achieve an objective, partly on the value of information generated and partly because of the ease with which the tests can be automated.
What are the technical considerations for automation?
At the most fundamental, technical level, there are four aspects of the system under test that must be considered. How the system under test is stimulated, and how the test outcomes of interest (with respect to regression) will be detected.
Mechanisms for stimulating the system under test
This aspect reflects how a test is driven by either a user or an automated tool. Nowadays, the number of user and technical interfaces in use is large – and growing. A table of the most common are presented and some suggestions made.
|PC/Workstation-based applications and clients|
|Web-Server-based functionality (HTTP)|
|Error, failure, spate, race conditions or other situations|
There are an increasing number of proprietary and open source unit and acceptance testing frameworks available to manage and control the test execution engines above.
Outcome/Output detection and capture
A regression can be detected in as many ways as any outcome (output, change of state etc.) of a system can be exposed and detected. Here’s a list of common outcome/output formats that we may have to deal with. This is not a definitive list.
|Any screen-based output|
|Transaction response times|
|Message output and content|
|Client or server system resources|
|Application or other infrastructure – changes of state|
|Changes in accessibility or usability (adherence to standards etc.)|
Comparison of Outcomes
A fundamental aspect of regression testing is comparison of actual outcomes (in whatever format from whatever source above) to expected outcomes. If we are running a test again, the comparison is between the new ‘actual’ output/outcome and previously captured ‘baseline’ output/outcome.
Simple comparison functionality of numbers, text, system states, images, mark-up language, database content, reports, message payloads, system resource is not enough. We need to have a capability in our automation to:
Filter content: we may not need to compare ‘everything’. Subsets of database records, screen/image regions, branches or leaves in marked up text, some objects and states but not others etc. may be filtered out (of both actual and baseline content).
Mask content: of the content we filter out, we may wish to mask out certain patterns of content such as image regions that do not contain field borders; textual report columns or rows that contain dates/times, page numbers, varying/unique record ids etc.; screen fields or objects of certain colours, sizes, that are hidden/visible; patterns of text that can be matched using regular expressions and so on.
Calculate from content: the value, significance or meaning of content may have to be calculated: perhaps the number of rows displayed on a screen is significant; the error message, number or status code displayed on a screen image, extracted by text recognition; the result of a formula in which the variables are extracted from an outputted report and so on.
Identify content meeting/exceeding a threshold: the significance of output is determined by its proximity to thresholds such as: CPU, memory or network bandwidth usage compared to pre-defined limits; the value of a purchase order exceeds some limit; the response time of a transaction exceeds a requirement and so on.
The architecture of a system may have a significant influence over the choice of regression approach and automation in particular. An example will illustrate. An increasingly common software model is the MVC or model-view-controller architecture. Simplistically (from WikipediaJ):
“The model is used to manage information and notify observers when that information changes; the view renders the model into a form suitable for interaction, typically a user interface element; the controller receives input and initiates a response by making calls on model objects. MVC is often seen in web applications where the view is the HTML or XHTML generated by the app. The controller receives GET or POST input and decides what to do with it, handing over to domain objects (i.e. the model) that contain the business rules and know how to carry out specific tasks such as processing a new subscription.”
A change to a ‘read-only’ view may be completely cosmetic and have no impact on models or controllers. Why regression test other views, models or controllers? Why automate testing at all – a manual inspection may suffice.
If a controller changes, the user interaction may be affected in terms of data captured and/or presented but the request/response dialogue may allow complete control of the transaction and examination of the outcome. In many situations, automated control of requests to and from controllers (e.g. HTTP GETs and POSTs) is easier to achieve than automating tests through the GUI (i.e. a rendered web page).
Note that cross-browser test automation, to verify the behaviour and appearance of a system’s web pages across different browser types, for example, cannot be handled this way. (Some functional automation may be possible, but some usability/accessibility tests will always be manual).
It is clear that the number and variety of the ways a system can be stimulated and potentially regressive outcomes can be observed is huge. Few, if any tools, proprietary or open source, have all the capabilities we need. The message is clear – don’t ever assume the only way to automate regression testing is to use a GUI-based test execution tool!
Regression test automation – summary
In summary, we strongly advise you to bear in mind the following considerations:
1. What is the outcome of your impact analysis?
2. What are the objectives of your anti-regression effort?
3. How could regressions manifest themselves?
4. How could those regressions be detected?
5. How can the system under test be stimulated to exercise the modes of operation of concern?
6. Where in the development and test process is it feasible to implement the regression testing and automation?
7. What technology, tools, harnesses, custom utilities, skills, resources and environments do you need to implement the automated regression test regime?
8. What will be your criteria for automating (new or existing, manual) tests?
Some Test Automation References
1. Brian Marick, 1997, Classic Testing Mistakes,http://www.exampler.com/testing-com/writings/classic/checklist.html
2. James Bach, 1999, Test Automation Snake Oil,http://www.satisfice.com/articles/test_automation_snake_oil.pdf
3. Cem Kaner, James Bach, Bret Pettichord, 2002, Lessons Learned in Software Testing, John Wiley and Sons
4. Dorothy Graham, Paul Gerrard, 1999, the CAST Report, Fourth Edition
5. Paul Gerrard, 1998, Selecting and Implementing a CAST Tool,http://gerrardconsulting.com/?q=node/532
6. Brian Marick, 1998, When Should a Test be Automated?http://www.visibleworkings.com/papers/automate.pdf
7. Paul Gerrard, 1997, Testing GUI Applications,http://gerrardconsulting.com/?q=node/514
8. Paul Gerrard, 2006, Automation below the GUI (blog posting),http://gerrardconsulting.com/index.php?q=node/555
9. Scott Ambler, 2002-10, Introduction to Test-Driven Design,http://www.agiledata.org/essays/tdd.html
10. Naresh Jain, 2007, Acceptance-Test Driven Development,
In the final article of this series, we’ll consider how an anti-regression approach can be formulated, implemented and managed and take a step back to summarise and recap the main messages of these articles.
To be continued…